A Healthy Basement Company Serving Hendersonville and Asheville NC
Call Us Now: 828-759-5522

Basement Waterproofing & Crawl Space Repair in Fletcher

Basement & Radon Solutions is an industry leader in basement waterproofing, concrete lifting and crawl space repairs. We have more than 30 years of experience serving the residents of Western North Carolina. We strive to offer the best technology and service to our clients.

Basement & Radon Solutions offers a wide array of services to improve the conditions of your damaged basement or crawl space. Whether you need crawl space encapsulation, basement waterproofing, concrete lifting or something else, our technicians are ready to get your home or business back in prime condition in NC.

We can also help you test your home for radon gas. We have tested and fixed thousands of homes with radon problems since 1998. Some of the most popular services we provide include:

For almost two decades, the certified technicians from Basement & Radon Solutions have been an industry leader in providing residential and business customers in North Carolina and South Carolina with state-of-the-art foundation and crawl space repair, waterproofing, concrete lifting, radon testing, and radon mitigation at affordable prices.

When you need a vapor barrier or ventilation for your crawl space, we can help. If your basement stays wet, we can dry it out with a sump pump, a drainage system or a wide variety of proven dehumidification techniques. Our concrete lifting services are a cost-effective, permanent solution to elevating sunken concrete walkways, driveways, floors, and slabs that have settled.

We also will safeguard your family and co-workers from the dangers of toxic radon gas, which is odorless, colorless, tasteless, and impossible to notice by using any of the human senses. It could be present in your home or office right now. Keep your family and co-workers safe and sound with radon testing and mitigation by Basement & Radon Solutions. We bring more than 16 years of experience to the table as an industry leader in innovation and expertise.

Contact Us for Crawl Space Repair, Radon Testing, Mitigation & Basement Waterproofing in Fletcher

When you need help with your basement, crawl space, foundation, sunken concrete or radon testing, contact Basement & Radon Solutions today for a free estimate and to get started on your project!

We excel at providing premier service to all of our customers. Call us today at 828-759-5522 and we'll get started right away!

Customer Reviews from Fletcher
Charlene C. from Fletcher, NC
5 Stars
Reviewed on Google
Oct 19th, 2020
Austin and his helper did a great job. Professional. Explained everything to us that was being done. Austin was very kind and helpful. Would recommend him to others
Susan S. from Fletcher, NC
5 Stars
Reviewed on Angie's List
Mar 2nd, 2016
They were very prompt in responding to my call and always showed up on time. They provided a
detailed quote prior to performing the work. Although their quote was not the least expensive, I decided
to have them do the job because of their knowledge and professionalism.
Completed Jobs from Fletcher
Allison B.
June 29, 2021
Basement & Radon Solutions, BRS Pros installed an Aprilaire E100 Energy Star dehumidifier in Allison's crawl space. The Aprilaire Model E100 Energy Star rated dehumidifier delivers 23% annual energy savings above conventional products, a high-capacity solution designed for humidity control in crawl spaces. The Model E100 removes up to 95 pints (11 7/8 gallons) of moisture per day! Proudly made in the USA. Also comes with a five year manufacturer's parts warranty when installed by BRS Pros, an authorized installer for Aprilaire. With the dehumidifier we also installed a Hygrometer. This is a remote temperature and relative humidity meter stand alone unit with one remote sensor. The wireless remote sensor was mounted in the crawl space to give Allison an accurate reading of relative humidity. This product will help her monitor the effective humidity of the dehumidifier in the crawl space. It was a pleasure helping Allison get a working dehumidifier again to help make her home happy, healthy, and safe again!
Lift and level section 3 of sidewalk. Frank G.
June 18, 2021
Basement & Radon Solutions, BRS Pros used our Poly Fill to lift the concrete slabs that have sunk. Here are some steps taken to help and some benefits: 1. Drilling holes in strategic spots on the slab – holes were drilled in the affected areas of the concrete slabs. Usually in a regular pattern and spacing to allow for even pumping of concrete raising material underneath. 2. Polyurethane foam is pumped in – with the holes in the slab, polyurethane foam is pumped in with the use of a high-pressure injection gun. The material instantaneously expands and fills the voids underneath the slab and in the soil, raising the concrete to its original level. This material also helps stabilize the soil underneath by filling in the gaps and compressing loose areas. 3. Cost Effective – Concrete raising is typically half the cost of replacing the same concrete. Ultimately, the cost of raising or stabilizing concrete is a direct reflection of how much leveling material the project will require. 4. Quick-Cure Time – Polyurethane typically cures 15 minutes after injection allowing areas to be fully available in minutes instead of days. 5. Clean Work Environment – No concrete or grout spatter and no wash-down needed. 6. Small Holes – Polyurethane concrete raising creates nearly invisible 5/8" holes with minimal patchwork required. 7. Lightweight – Weighing only 2-4lbs per cubic foot, high density polyurethane's lightweight characteristics will not overburden the soil. 8. Green! – The poly foams we use are environmentally friendly, consisting of 39-49% renewable and recycled materials that are made in the USA. Most poly raw materials are petroleum-based. Our green polyurethane Biobased materials are not only good for the environment, but actually enhance the foam properties. It was a pleasure helping Frank make his home safe, healthy, and happy again!
Void fill and support. Robert C.
June 8, 2021
Basement & Radon Solutions, BRS Pros lifted Robert's front porch to get it back level. Here is the process and some benefits! 1. We start by drilling holes in strategic spots on the slab – the holes are drilled in the affected areas of the concrete slabs, usually in a regular pattern and spacing to allow for even pumping of concrete raising material underneath. 2. Then, the polyurethane foam is pumped in – with the holes in the slab, polyurethane foam is pumped in with the use of a high-pressure injection gun. The material instantaneously expands and fills the voids underneath the slab and in the soil, raising the concrete to its original level. This material also helps stabilize the soil underneath by filling in the gaps and compressing loose areas. 3. Cost Effective – Concrete raising is typically half the cost of replacing the same concrete. Ultimately, the cost of raising or stabilizing concrete is a direct reflection of how much leveling material the project will require. 4. Quick-Cure Time – Polyurethane typically cures 15 minutes after injection allowing areas to be fully available in minutes instead of days. 5. Clean Work Environment – No concrete or grout spatter and no wash-down needed. 6. Small Holes – Polyurethane concrete raising creates nearly invisible 5/8" holes with minimal patchwork required. 7. Lightweight – Weighing only 2-4lbs per cubic foot, high density polyurethane's lightweight characteristics will not overburden the soil. 8. Green! – The poly foams we use are environmentally friendly, consisting of 39-49% renewable and recycled materials that are made in the USA. Most poly raw materials are petroleum-based. Our green polyurethane Biobased materials are not only good for the environment, but actually enhance the foam properties. It was a pleasure to help Robert make his home safe, healthy, and happy again!
Replace sump pump (Not functioning) - Located directly below interior access to large crawlspace Deborah M.
June 3, 2021
Basement & Radon Solutions, BRS Pros started by replacing all 3 of the Sump Pumps in the crawl space. Then, we installed a Hydra-Channel (dewatering system). A clean trench was dug along the full interior perimeter of the crawl space foundation. The Hydra-Channel was installed according to the manufacturer's instructions adjacent to the footing. The Hydra-Channel engineered fusion welded high strength polyethylene water system will remove storm water up to 70% faster than a pipe and stone system, allowing water to flow freely to the in-ground sealed sump pump/basin. The Hydra-Channel system will carry a five year transferable warranty to prevent water on top of the ground liner. We also installed new 15 mil our premium (walk on, store on) 15-mil white 100% woven reinforced ground liner. The premium ground liner will be nailed/sealed approximately 6" to 12" above the ground to the foundation wall. 15-mil woven ground liner will control moisture vapor and dampness from the ground. Our woven ground and wall liners are antibacterial, meaning mold and other organic growth will not grow to our liner. Lastly, we installed a Hygrometer. This is a Remote Temperature and Relative Humidity Meter stand alone unit with one remote sensor. The wireless remote sensor was mounted in Deborah your crawl space to give her an accurate reading of relative humidity. This product will also help her monitor the effective humidity of the dehumidifier in the crawl space. It was a pleasure helping Deborah make her home happy, healthy, and safe!
Raise and support to level joint. Kip T.
April 23, 2021

Basement & Radon Solutions, BRS Pros, did our poly lift for Kip on the 2 slabs of sidewalk. Here is how we do it, plus some benefits-

Drilling holes in strategic spots on the slab – holes were drilled in the affected areas of the concrete slabs, usually in a regular pattern and spacing to allow for even pumping of concrete raising material underneath.

Polyurethane foam is pumped in – with the holes in the slab, polyurethane foam is pumped in with the use of a high-pressure injection gun. The material instantaneously expands and fills the voids underneath the slab and in the soil, raising the concrete to its original level. This material also helps stabilize the soil underneath by filling in the gaps and compressing loose areas.

Cost Effective – Concrete raising is typically half the cost of replacing the same concrete. Ultimately, the cost of raising or stabilizing concrete is a direct reflection of how much leveling material the project will require.

Quick-Cure Time – Polyurethane typically cures 15 minutes after injection allowing areas to be fully available in minutes instead of days.

Clean Work Environment – No concrete or grout spatter and no wash-down needed.

Small Holes – Polyurethane concrete raising creates nearly invisible 5/8" holes with minimal patchwork required.

Lightweight – Weighing only 2-4lbs per cubic foot, high density polyurethane's lightweight characteristics will not overburden the soil.

Green! – The poly foams we use are environmentally friendly, consisting of 39-49% renewable and recycled materials that are made in the USA. Most poly raw materials are petroleum-based. Our green polyurethane Biobased materials are not only good for the environment, but actually enhance the foam properties.

It was a pleasure to help Kip & the HOA to make their sidewalks safe, happy, and healthy!